Several places that motorcycle tricycles must be maintained

01 how to buy a new motorcycle tricycle maintenance?

Many people have a habit of buying things, that is, after buying them, they always think that the manufacturer or distributor has already arranged and adjusted them, and they don't need to do maintenance or tighten the screws themselves. In fact, the dealer simply removed the package, installed the wheels, added the oil, and could walk normally. Other details did not do much.

Manufacturers now produce on-line operations. Some are fast, some screws are tight, some screws are not tightened, and some lines and exhaust pipes need to be bandaged on the way. These things are temporarily neglected after sale and are not taken away. Slowly, some minor problems will appear in use. Only then will they realize where the car needs maintenance.

02 oil tricycle these several must be maintained

These places must be maintained, and the screws will be loose:

For example, there is an oil outlet pipe next to the reverse gear of the engine. The oil outlet pipe is used to take some of the air pressure and waste oil generated during use. For good ventilation, when the manufacturer shipped out the new car, in order to prevent the gear oil from flowing out, Generally, this oil pipe is tied up with a cable tie, and in order to prevent it from falling off or getting dirty things in.

If the air pipe is not opened and ventilated, and some waste oil from the exhaust gas is not flowed out during operation, bubbles will be blocked. In severe cases, the vehicle will not run normally and the reverse gear will be damaged. The reverse gear seems to be small, but it is still very useful. It can be quickly reversed to bring convenience. The oil circuit is not smooth, the exhaust gas and oil will not be discharged, and the reverse gear will be easily damaged. And in use to replace the gear oil, so in order to make the machine gear better lubrication.

The screws of the exhaust pipe must be tightened. There is software on the exhaust pipe. However, when the motorcycle generates heat, the cushion will soften and the screws will loosen over time. At this time, we must tighten the screws once after buying the car. It is best to tighten the screws while the heat is hot. Tighten it again after a period of time, so check it frequently and there will be fewer problems.

If it is not tightened in time, the screw will be broken, which is very troublesome to operate. This kind of thing happens from time to time. The fixing screws of the gear shifter must be tightened, that is, the start lever and the shift lever. Because the gear shifter is often stepped on and stepped on, the screws will be loosened. Some car owners do not tighten the screws in time, and the screws will be worn out in time. Loose, this is more troublesome, which requires reprocessing or installing a new one. Therefore, we must prevent these small places in advance.

The cross and butter, the large screws for fixing the front fork, and the tire screws for the front and rear wheels are all tightened. These screws are also relatively easy to loosen. Some car owners have lost their screws and do not know yet, or they start to look for problems when they cannot master them. When there is time, the wire of the shaft head will wear bald, which is a bit of trouble and requires money to repair.

Some of the following problems are changing the oil and adding butter, which are known to people who drive and ride bicycles. This is all about regular maintenance, so that the vehicle will be used longer and there will be fewer problems. Some cars are well maintained and rarely have problems after 4 to 5 years of use. Everyone must pay attention to this.