What should I do if the motorcycle engine fault light is on
Release time:
2024-03-14
If the engine fault light is on, but the motorcycle can still work normally, there may only be some mechanical faults. It is recommended to go to a professional maintenance shop for detailed inspection as soon as possible.
When the motorcycle engine fault light is on, corresponding measures should be taken according to different situations:
If the engine fault light is on, but the motorcycle can still work normally, there may only be some mechanical faults. It is recommended to go to a professional maintenance shop for detailed inspection as soon as possible.
If the motorcycle cannot be driven normally after the engine fault light is on, accompanied by problems such as jitter and black smoke, stop using the motorcycle immediately and seek rescue or send it to a repair shop.
If the engine fault light is on because of fuel quality problems or maintenance is not timely, replace high-quality fuel and maintain it regularly.
If the engine fault light is on because of wiring problems or oil pump failure, check the wiring and repair or replace the oil pump in time.
If the fuel is exhausted and the fault light is on, the fault light will usually go out after adding fuel, but high-end models may still be on. At this time, you can go to the 4S shop to eliminate the fault code.
If the liquid level of the EFI system is uneven and the fault light is on, you should remove the key and turn off the engine for a period of time before trying to start. If the fault light is still on, you need to go to the 4S shop to eliminate the fault code.
If the gasoline temperature is too high and the fault light is on, the motorcycle should be placed in a cool place to cool down. The fault light will usually go out after the oil temperature drops.
In short, when the engine fault light is on, appropriate measures should be taken according to the specific situation, and professional maintenance assistance should be sought when necessary.